Copper Basins and Sinks for Kitchen and Bath

Copper Vessel Sink

Our above counter copper vessel sink is hand-hammered from a single piece of copper.
• Gauge #16
• 6 lbs
• Drilled to accommodate a 1.5" industry standard drain fitting.
Item: JMCP-1-15
15" W x 6" H

Oval Self-Rimming/Undermount Copper Sink

Our undermount or self-rim oval copper sink is hand-hammered from a single piece of copper.
• Gauge #15
• 6 lbs
• Drilled to accommodate a 1.5" industry standard drain fitting.
Item: JMCP-2-16
16" W x 13" across x 5 1/2" H.

Square Copper Bar/Prep Sink

Our square copper bar / prep sink is hand-hammered from a single piece of copper. These pictures show the texture of the hammered surface and seamless (no soldering) joints.
• 15" x 15" outside dimensions (13" x 13" inside)
• Gauge #15
• 7 lbs
• Drilled to accommodate a 2" industry standard junior basket.
Item: JMCP-3-13
13" W x 13" across x 7 1/2" H.

Rectangular Copper Bar/Prep Sink

Our rectangular copper bar / prep sink is hand-hammered from a single piece of copper. These pictures show the texture of the hammered surface and seamless (no soldering) joints.
• 15" x 12" outside dimensions (13" x 10" inside)
• Gauge #15
• 6 lbs
• Drilled to accommodate a 2" industry standard junior basket.
Item: JMCP-4-13
13" W x 10" across x 7 1/2" H.

Self-Rimming or Undermount Copper Sink

Our undermount or self-rimming copper sink is hand-hammered from a single piece of copper. Available in two sizes.
• Gauge #15
• 6 lbs
• Drilled to accommodate a 1.5" industry standard drain fitting.
Item: JMCP-5
Comes in:
12" W x 6" H
15" W x 6.5" H

Copper Kitchen Sink

Our copper kitchen sink is hand-hammered from a single piece of copper. These pictures show the texture of the hammered surface and seamless (no soldering) joints.
• 30" x 19" outside dimensions (28" x 17" inside)
• Gauge #15
• 30 lbs
• Drilled to accommodate a 3.5" industry standard drain basket or garbage disposal
Item: JMCP-8-27
Item: 28" W x 17" across x 8 1/2" H.